Description: 2300F Ceramic Fiber Moldable Material in smaller 10.3 OZ tube
INSWOOL MOLDABLE is a 2300F ceramic fiber, putty-like consistency material, used for linings up to three inches thick, to pack large voids, oreven fill thin cracks. It can be troweled or hand packed into place.INSWOOL MOLDABLE is light weight, with very low thermal conductivity, and therefore a good insulator, yet it develops a strong hot face surface towithstand physical abuse and high air velocities as compared to conventional ceramic fiber products. It is also used as a high temperature gasketmaterial, and as a general purpose patching product. Its ability to compress makes INSWOOL MOLDABLE an excellent material for expansionjoints and for filling contraction cracks. It is also an ideal material to fill ceramic cuplock anchors for ceramic fiber blanket linings, and can be used incontact with molten aluminum.
INSWOOL MOLDABLE has excellent thermal shock resistance, and can be dried or put into service immediately with no pre-heat required, with theexception of direct molten metal contact. Then the INSWOOL MOLDABLE should first be thoroughly dried, and fired, to remove all mechanicalwater the entire depth of the material, to avoid dangerous steam explosion.INSWOOL MOLDABLE has excellent thermal shock resistance, and can be dried or put into service immediately with no pre-heat required, with theexception of direct molten metal contact. Then the INSWOOL MOLDABLE should first be thoroughly dried, and fired, to remove all mechanicalwater the entire depth of the material, to avoid dangerous steam explosion.
NMFC Code: 103300-4
Freight Class: 175
Item Weight: 1.00 lbs